manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, User Manual, Page: 214 / 507

Share
Download
Agilent Technologies Auroraduet N1726A User Manual Download Page 214

Issue 01 - 06/99

4 - 73

Testing in Simulate Mode - Section 3

Configuration Information

Start Time

Time the test was started, in hours:minutes format.

Start Date

Date on which the test was run, in day/month/year

format.

Protocol

Protocol in use.

Access Type

Indicates if aurora

Duet

 was in basic rate (

BRI

) or primary

rate (

PRI

) mode.

Interface

(BRI)

Indicates if the test was run on the 

S

,

 T

 or 

U

 interface.

Mode

Device aurora

Duet

 was emulating - 

TE

, 

NT

 or 

LT

 (BRI).

Line Type

(BRI)

Line type in use - 

PP

 or 

PMP

.

L2 Protocol

Indicates the layer 2 protocol - 

Slave

 or 

Master

.

Channel

(service test)

The B channel on which the test was performed - 

B1

through to 

B30

.

Test Type

(service test)

Displays the type of service test - 

Local

 or 

Distant

.

Service

(channel tests)

Bearer service used for the test.

Performing a Combination Test 

 

 

With the Combination test, you can automatically run
the following tests, one after the other:

•

a Service Test

•

an Outgoing Channel Test on the current channel

•

In PRI mode, Layer 1 is also monitored and its

status reported on.

Ø

Choose 

COMBINATION TEST 

from the 

AUTOTEST

menu.

The following screen is displayed:

Chap4s3.PM6

17/06/99, 09:44

73

Summary of Contents for Auroraduet N1726A




























































































































































































































































































































































































































































































































Reviews:

No comments