Agilent Technologies Auroraduet N1726A, User Manual, Page: 159 / 507

aurora
Duet
- User Guide
4 - 18 422685
Sending an NAE
You can send a Network Address Extension (NAE) with
the call setup, for dialling directly to a PBX extension.
Ø Press F5 NAE from the Dial screen.
The NAE SELECTION screen is displayed.
Ø Enter an NAE of up to 6 characters.
For information about entering an NAE using this screen,
please refer to
Choosing a Network Address Extension in
Chapter 3 Section 2.
Ø Press F5 DIA to return to the Dial screen.
When Dialling is Initiated
When you choose DIAL , aurora
Duet
initiates a call to the
CPN/DA. If a CLI has been setup (see Chapter 3 Section
2), this value is included in the outgoing Call Setup
message.
The STATUS field at the bottom of the dial screen
changes as the call progresses. For example:
The following diagram shows the sequence of status
displays you would expect to see during a successful
connection:
Chap4s1.PM6 17/06/99, 09:41 18