Agilent Technologies Auroraduet N1726A, User Manual, Page: 292 / 507

Issue 01 - 06/99 6 - 13
Analysing Protocol Decode
Filtering for Specific Addresses
To display frames for specific envelope addresses or
Layer 3 addresses.
Ø Choose V5 INFO as the filter type.
aurora
Duet
displays the following pop-up box:
2
Note
The Layer 3 address filter does not affect the display of
any ISDN LAP-D information - it only applies to the V5
frames.
To change the filter for an address:
Ø Highlight it and press the LEFT arrow key to delete
the value currently assigned to it.
Ø Use the number keys to enter a new value, or press
F1 ALL to display V5 frames for all addresses - i.e.
to disable filtering for this address type.
Ø Press F6 EXIT to return to the main FILTERS pop-up
box.
The filters you choose remain in operation until you exit
the decode display, then they return to their default
values - all addresses included.
Chap6.PM6 17/06/99, 09:48 13