Agilent Technologies Auroraduet N1726A, User Manual, Page: 378 / 507

Issue 01 - 06/99 8 - 9
X.25 Operation - Section 2
• Use of an RS232 output option is not recommended
when transmitting large packets at high data rates.
If you wish to use an RS232 output option, e.g.
Decode, set the parameters to a reduced packet rate
and use smaller packet sizes.
Setting up Reverse Charging
To determine whether aurora
Duet
accepts calls which
request reverse charging:
Ø Highlight R CHARGE and press the LEFT and
RIGHT arrow keys to toggle between YES and NO .
Reverse Charging Setup
Yes aurora
Duet
accepts any incoming call where a request for
reverse charging has been made, and allows reverse charging
on outgoing calls.
No aurora
Duet
rejects any incoming call where a request for
reverse charging has been made, and prevents requests for
reverse charging on outgoing calls.
Setting the Test Length
The test length determines the period for which a logical
connection is established and aurora
Duet
is transmitting
packets.
Ø Highlight TEST LENGTH and press the LEFT and
RIGHT arrow keys to choose one of the following:
Test Length
Continuous The test runs until you stop it
1 Min The test runs for 1 minute
15 Mins
The test runs for 15 minutes
1 Hour The test runs for 1 hour
User Def Lets you set a custom test length.
Chap8s2.PM6 17/06/99, 09:53 9