Agilent Technologies Auroraduet N1726A, User Manual, Page: 88 / 507

Issue 01 - 06/99 3 - 23
Setting up aurora
Duet
- Section 2
Ø Choose USER DEFINED SIC from the ISDN SETUP
menu.
A screen similar to the following is displayed, showing
any current SIC settings.
Each SIC string is displayed as two groups of two
hexadecimal digits. The default is
01 01 .
Entering User Defined SICs
Ø Use the cursor to highlight the line you want to edit
and press F3 EDIT .
A flashing cursor appears at the point where you can
enter the first digit.
Ø Use the keypad to enter digits 0 to 9 and the
function keys to enter hexadecimal digits A to F , as
follows:
F1 = A, F2 = B, F3 = C, F4 = D, F5 = E, F6 = F.
You can enter any hexadecimal number in the range 00
00 to FF FF .
If you make a mistake, use the LEFT arrow to move the
cursor to the start of the line and begin again.
To save your settings, press the UP or DOWN arrows
while editing. Once four valid digits have been entered,
aurora
Duet
saves the value automatically. To continue
entering SICs, highlight an SIC line and press F3 EDIT .
Chap3s2a.PM6 17/06/99, 09:37 23