Agilent Technologies Auroraduet N1726A, User Manual, Page: 167 / 507

aurora
Duet
- User Guide
4 - 26 422685
The currently selected B channel is highlighted and its
number appears at the top of the screen.
To select another channel:
Ø Highlight it by moving the cursor or entering the
channel number you require.
You must enter two digits - for example, for channel 3
you would enter 03.
Ø Press F2 CON .
An arrow pointing downwards appears in the channel
box.
Ø Highlight the second B channel and press F2 CON .
An arrow pointing downwards appears in the channel
box. This completes the cross connection. Each channel
in the pair displays the number of the channel to which it
is connected, directly below the box.
2
Note
You cannot connect a channel that does not already have
an established call, or which is already part of a
connected pair.
Removing a Cross Connection
Ø Press F2 CH to display the B CHANNEL
SELECTION screen.
Ø Move the cursor to highlight either of the channels
in a cross connected pair and press F3 DIS.
The vertical arrow is replaced in both channel boxes by
the symbol for an established call.
Chap4s1.PM6 17/06/99, 09:42 26