manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, User Manual, Page: 259 / 507

Share
Download
Agilent Technologies Auroraduet N1726A User Manual Download Page 259

aurora

Duet

 - User Guide

5 - 20

422685

toggle to the session name display.

Starting the Monitor Session

Ø

Press 

F5 

START 

to begin the monitor session.

The monitor session begins and aurora

Duet 

displays the

DATA MONITOR

 screen:

If you have set an automatic start time

If you have set up an automatic timed start for
monitoring (see 

Setting an automatic start time

 earlier in

this chapter), and you press 

F5 

to start a session,

aurora

Duet

 does not begin the monitor session. It displays:

STATUS: START hh:mm:ss

, where hh:mm:ss is the time

the monitor session will begin.

Understanding the Data Monitor Screen

Channel

the channel selected for monitoring

Status

the current status of the data
monitor: 

PAUSED

, 

RUNNING 

or

START

. If a protocol other than the

one specified is being monitored,

WRONG PROTOCOL

 is displayed.

If a filter is applied, 

FILTERING 

is

displayed. 

CALL TRACE AP.

 is

Chap5s1.PM6

17/06/99, 09:47

20

Summary of Contents for Auroraduet N1726A




























































































































































































































































































































































































































































































































Reviews:

No comments