Agilent Technologies Auroraduet N1726A, User Manual, Page: 77 / 507

aurora
Duet
- User Guide
3 - 12 422685
Emulation mode: ISDN Fixed Links
TE
,
No
D Chan
On Primary Rate or the Basic Rate S interface, aurora
Duet
emulates a TE connected to a fixed link, acting as network
clock receiver.
At the U interface, aurora
Duet
emulates a TE connected to the
U interface point, acting as clock receiver. It replaces either a
TE with a U interface or a TE connected through an S bus
and an NT unit's U interface. This is used for testing the local
PABX connection.
NT , No
D Chan
On Primary Rate or the Basic Rate S interface, aurora Duet
emulates an NT connected to a fixed link S interface, acting
as network clock generator.
LT , No
D Chan
(BRI)
At the U interface, aurora
Duet
emulates a L
ine
Termination,acting as network clock generator. This is used
for testing into the NT.
Saving your Selections
Ø Press F6 EXIT until you return to the Main menu.
aurora
Duet
reconfigures itself to the settings you have
chosen - this may take a few moments.
Setting up aurora
Duet
using Hot Keys
aurora
Duet
provides Hot Keys, which allow you to
configure the unit automatically, at the touch of a button.
The Hot Keys available depend on how your unit is set
up.
In BRI mode:
• Hot Keys 5 and 6 are only available when a Up0
interface is fitted.
• Hot Key 7 is only available when a 2B1Q interface
is fitted.
• Hot Key 8 is only available when a 4B3T interface
is fitted.
Chap3s1.PM6 17/06/99, 09:37 12