Agilent Technologies Auroraduet N1726A, User Manual, Page: 101 / 507

aurora
Duet
- User Guide
3 - 36 422685
Ø Use the keypad to enter digits 0 to 9 and the
function keys to enter hexadecimal digits.
Your entry can be any hexadecimal number in the range
00 to FF . Each LLC must contain a minimum of one and
a maximum of fourteen octets.
If you make a mistake, press the LEFT arrow to delete
one octet.
Ø To finish editing the LLC , press either the UP or
DOWN arrow keys.
If you have not entered an even number of digits (i.e.
complete octets) aurora
Duet
will not allow you to finish
editing.
Including High Layer Compatibility (HLC)
HLC information provides destination equipment with
additional compatibility details about the call. See
About
Bearer Capabilities, HLCs and LLCs in Appendix 1.
To include HLC with your bearer capability:
Ø Move the cursor to SET HLC and use the LEFT and
RIGHT cursor keys to choose YES .
HLCs are input in the same way as LLCs (see previous).
Your entry can be any hexadecimal number in the range
00 to FF . Each HLC must contain at least one and no
more than three octets.
Saving your Selections
Ø When you have finished entering the bearer
capabilities, press F6 EXIT .
aurora
Duet
saves your settings and returns to the ISDN
SETUP menu.
Chap3s2a.PM6 17/06/99, 09:38 36