manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, User Manual, Page: 104 / 507

Share
Download
Agilent Technologies Auroraduet N1726A User Manual Download Page 104

Issue 01 - 06/99

3 - 39

Setting up aurora

Duet

 - Section 2

Progress Indicator - Description

End to end

Call is not end to end ISDN (PI = 1)

Dest non

ISDN

Destination address is non ISDN (PI = 2)

Orig non

ISDN

Originating address is non ISDN (PI = 3)

Returned

Call has returned to the ISDN (PI = 4)

Inband

In-band information or an appropriate pattern is now

available  (PI = 8)

2

Note

For full details of these settings, see Q.931 (1993) 4.5.23
and Annex G.

Choosing the Class Of Service 

 

Class of Service (COS) is a supplementary service within
DPNSS.

To choose the COS to be sent in outgoing calls.

Ø

Choose 

CLASS OF SERVICE 

from the 

ISDN SETUP

menu.

The following screen is displayed.

Ø

Highlight 

CLASS OF SERV

 and use the 

LEFT 

and

RIGHT 

arrow keys to toggle between the following

options:

Chap3s2a.PM6

17/06/99, 09:38

39

Summary of Contents for Auroraduet N1726A




























































































































































































































































































































































































































































































































Reviews:

No comments