Agilent Technologies Auroraduet N1726A, User Manual, Page: 95 / 507

aurora
Duet
- User Guide
3 - 30 422685
Setting the minimum charge
If you select CCRD as the service, to specify the minimum
number of units which will be charged for a call:
Ø Highlight INITIAL UNITS and enter a number, up to
seven digits in length.
Setting the cost of each unit
If you select CCRD as the service, to set the cost of each
unit in pence:
Ø Highlight UNIT COST and enter a number, up to
seven digits in length. To enter a decimal point,
press
F3 PNT .
Setting the duration of each unit
If you select CCRD as the service, to set the duration of a
single unit in seconds:
Ø Highlight UNIT TIME and enter a number, up to
seven digits in length. To enter a decimal point,
press
F3 PNT .
2
Note
To clear current information, use the F4 CLR key.
Choosing manual or automatic charging
If you select CCI as the service, to specify whether
charging is to be generated manually or automatically:
Ø Highlight MODE and use the LEFT and RIGHT
arrow keys to toggle between MANUAL and
AUTOMATIC :
Charge Generation
Manual
Charging accrues at five pence for each press of the
charge function key in the Call Connected screen
Automatic Charging accrues at five pence for every ten seconds that
the call is connected. When the call is cleared the total call
charge is sent to the PBX.
Chap3s2a.PM6 17/06/99, 09:38 30