Agilent Technologies Auroraduet N1726A, User Manual, Page: 428 / 507

Issue 01 - 06/99 A2 - 11
Appendix 2 - Call Clearing Cause Codes
98 Message not compatible with call state or
message type non-existent or not implemented
The equipment sending this cause has received a
message which it considers as non-permissible
while in the call state; or a
STATUS message was
received indicating an incompatible call state.
99 Information element non-existent or not
implemented
The equipment sending this cause has received a
message which includes information elements not
recognised, either because the information
element identifier is not defined, or because it is
defined but not implemented by the equipment
sending the cause. However, the information
element does not need to be present in order for
the equipment to process the message.
100 Invalid information element contents
The equipment sending this cause has received an
information element which it has implemented
but the contents are invalid (e.g. truncated,
invalid extension bit, invalid field values, etc.).
101 Message not compatible with call state
The equipment sending this cause has received a
message that procedures indicate is not a
permissible message to receive at this time.
102 Recovery on time expiry
No further call progress in call establishment has
been received, and the call has timed out. A
clearing message should be sent to the user.
103 Mandatory information element of incorrect
length
Appx2.PM6 17/06/99, 09:55 11