Agilent Technologies Auroraduet N1726A, User Manual, Page: 291 / 507

aurora
Duet
- User Guide
6 - 12 422685
Ø Highlight each protocol type and use the LEFT and
RIGHT arrow keys to switch between FILTER IN
and FILTER OUT , as required.
Ø Press F6 EXIT to return to the main FILTERS menu.
The filters you choose remain in operation until you exit
the decode display, then they return to their default
values - all protocols filtered in.
Filtering for SAPIs, TEIs and Call References
To display ISDN LAP-D frames for specific SAPI, TEI
and call reference values:
Ø Choose ISDN INFO as the filter type.
aurora
Duet
displays the following pop-up box:
For information on filtering on SAPIs, TEIs and call
reference values, see
Applying a Filter , earlier in this
Chapter.
The filters you choose remain in operation until you exit
the decode display, then they return to their default
values - all SAPIs, TEIs and call references.
2
Note
These filters do not affect the display of any V5
information: they only apply to the ISDN LAP-D frames.
Chap6.PM6 17/06/99, 09:48 12