Agilent Technologies Agilent E5250A, User Manual

Page: 250 / 326

8-26 Agilent E5250A User’s Guide, Edition 11
VXIplug&play Driver
Driver Functions
hpe5250a_openCard
This function will disconnect all input ports from all output ports for the specified
card. Then if bias mode is ON, connects the input bias port to all bias enabled output
ports.
Syntax ViStatus _VI_FUNC hpe5250a_openCard(ViSession vi, ViInt16 open_cardno);
Parameters vi Instrument handle returned from hpe5250a_init( ).
open_cardno Card number. 1 (card 1), 2 (card 2), 3 (card 3), 4 (card 4), or 5
(all card) in the normal configuration mode, or 0 (all card in the
automatic configuration mode). For the configuration mode, see
hpe5250a_func.
hpe5250a_openList
This function will disconnect the input ports from the output ports specified by the
channel list.
The parameter ’openchan_list’ is an array of integers with each integer representing
one channel. The last number of the ’openchan_list’ should be "0" (numeric zero)
to identify the end of the list. The maximum number of channels that can be
specified by the list is 100.
Syntax ViStatus _VI_FUNC hpe5250a_openList(ViSession vi,
ViInt32_VI_FAR openchan_list[ ] );
Parameters
vi Instrument handle returned from hpe5250a_init( ).
openchan_list[ ] Channel numbers to disconnect. 5 digits integer. ABCDE.
where A: card number, BC: input port number, DE: output port
number. Top zero(s) can be ignored. For example, if A=0,
BC=01, and DE=01, channel number should be 101 instead of
00101.