Agilent Technologies Agilent E5250A, User Manual

Page: 90 / 326

4-20 Agilent E5250A User’s Guide, Edition 11
Setting up Measurement Environment
Connecting the E5250A Output
Connecting the E5250A Output
This section describes how to connect the E5252A and E5255A output to connector
plate, your test fixture, and so on.
• “To Connect the E5252A Output”
• “To Connect the E5255A Output”
WARNING Turn off the E5250A and all instruments connected to the E5250A. And do not
turn them on until the connection described in this section is completed. If you
ignore this warning, you may be exposed to dangerous voltage.
To Connect the E5252A Output
The E5252A output connector is shown in Figure 4-8. The E5250A input signal
(SMU input or AUX input) appears at the E5252A output connector as shown in
Figure 4-8 when input-output switching path is made.
Figure 4-8 E5252A Output Connector and Output Signal
You can easily connect the E5252A output connector to the connector plate or your
test fixture by using cables shown in Table 4-4.
Table 4-4 E5252A Output Cable
B
A
SMU
Input
AUX
B
A
Force or Sense
Signal line
Guard
Ground
Ground
Agilent Model No. Description
16494A-001 Triaxial cable, 1.5m (for non-Kelvin connection)
16494A-002 Triaxial cable, 3m (for non-Kelvin connection)
16494B-001 Kelvin Triaxial cable, 1.5m (for Kelvin connection)
16494B-002 Kelvin Triaxial cable, 3m (for Kelvin connection)