AFP Imaging Mini-Medical Series, Installation, Operation & Service Parts Manual

Page: 124 / 132

Accessories
Mini Med Series 0000061122
Support Stand, Continued
These instructions cover assembly of the support stand used for all
AFP Mini-Medical Series processors.
7-2
A
B
B
C
D
D
E
1. Assemble the Base Panel (Item A) to both End Legs (Item B) using
six (6) of the 1/2" Philips screws provided. Do not tighten.
2. Hang the Cross Panels (Item D) over the square bosses on the End Legs
(Item B) and secure with four (4) Philips screws, one on each boss.
3. Determine the positions of the Locator Cups (Item C) depending on
whether it is to be a Standard or Right/Left Side installation (refer to
the illustrations on the next page). Attach the Locator Cups (Item C) and
use four (4) additional Philips screws to finish attaching the Cross Panels.
4. Attach the Cross Brace (Item E) between one of the holes common to
the Cross Panel and the square boss and one of the threaded holes in
the flange of the Base Panel. Tighten all screws.