AFP Imaging Mini-Medical Series, Installation, Operation & Service Parts Manual

Page: 23 / 132

Introduction
Mini Med Series
0000061122
General Specifications
Films
RP type medical X-Ray films and compatible chemicals designed for RP type processing.
Film Size
Minimum Size: 4" X 4" (10 X 10 cm)
Maximum Size: 14" X 36" (35.6 C 91.4 cm)
Base thicknesses 0.004 - 0.008"
Developing Time
Factory set as follows:
Model Dev. Time Linear Speed
Mini-Medical 29 sec 20" per minute
Mini-Medical/90 22 sec 36" per minute
Min-Medical/EP 44 sec 10" per minute
Developer, Fix, & Wash
Systems
Capacity: 1.9 gallons (7.2 L.).
Temperature Control:
Developer: Factory Set as follows:
Mini-Medical 90 Degrees f. (32 C.)
Mini-Medical/90 95 Degrees f. (35 C.)
Mini-Medical/EP 95 Degrees f. (35 C.)
Fixer Ambient
Wash: Controlled by incoming water supply, .25 GPM (.95 LPM) during process and anti-
crystallization cycle. There is no water flow in standby mode.
Dryer System
Temperature: Factory set at 120 degrees f. (49 C.).
1-7