AFP Imaging Mini-Medical Series, Installation, Operation & Service Parts Manual

Page: 43 / 132

Installation
Mini Med Series 0000061122
Operational Checklist
l) Close drain valves.
2) Remove racks.
3) Partially fill tanks with warm water.
4) Replace racks.
5) Plug in processor, apply Power.
6) Inspect transport drive system.
7) Check recirculation plumbing for leaks.
8) Top off tanks using Manual Replenishment switch.
9) Check Film Feed switch and “Beeper” operation.
10) Check temperature control systems.
11) Check developing time.
12) Check for dryer heat and operation of both fans.
13) Check transport of material.
14) Drain Processor.
15) Charge with fresh chemistry.
Figure 2-5, Operational Checklist
2-13