AFP Imaging Mini-Medical Series, Installation, Operation & Service Parts Manual

Page: 24 / 132

Introduction
Mini Med Series 0000061122
General Specifications,
Continued
Environmental Conditions
Temperature: 40-80 Degrees f.
Humidlty: 40% - 60% RH.
Electrical Requirements
120 VAC, 15 amps, 60 Hz.
230 VAC, 7.5 amps, 50 Hz. (Optional)
Dimensions
Width 22" (56.1 Cm) Stand Only: Width 22.875"
Height: 24.5" (62.2 Cm) Height 29.5"
Length: 33" (84.1 Cm) Length 22.125"
(Including feed tray) Allow 1" (approximately) for leveling
Weight
Approximate Shipping Wt.: 110 lbs.
Approximate Operating Wt.: 160 lbs.
Air Conditioning Heat Load (Approximate)
Total Heat @ 60Hz Process Mode Standby Mode
2800 B.T.U./Hour 1800 B.T.U./Hour
Darkroom venting is required. Use a blower and vent combination that allows for approxi-
mately 300 CFM air flow through the darkroom.
Component Power Requirements
Component Amperage @ 115VAC
Solenoid 0.10
Developer Heater 4.55
Recirculation Pumps (2) 0.22 Ea.
Replenisher Pumps (2) 0.35 Ea.
Dryer Lamps (2) 2.17 Ea.
Fan Motors (2) 0.44 Ea.
Drive Motor 0.76
Total: 11.77 Amps
1-8