Aesculap Acculan 4, Instructions For Use/Technical Description

Page: 13 / 174

11
en
9. Troubleshooting list
►
Have defective products repaired by Aesculap Technical Service, see Technical Service.
Fault Cause Detection Remedy
Product not running No battery No battery in the battery shaft Insert battery.
Battery not charged No signal tone when inserting
the battery Charge battery in charger.
Battery broken No signal tone when inserting
the battery Have the manufacturer repair the battery.
Product in secured OFF position Safety catch is in OFF position Turn the safety catch into the ON position.
Product defective Product not running Have the manufacturer repair the product.
Product becomes too hot Excessive use Product heating Observe instructions for use (nominal operating
mode).
Reprocessing/maintenance carried
out incorrectly Product heating Observe instructions for use (processing, care).
Preventive measure: Oil product before every ster-
ilization.
Fall damage, product defective Product heating Have the manufacturer repair the product.
Blunt tool Tool and product become hot Change tool.
Insufficient power Product broken Insufficient product perfor-
mance Observe instructions for use (processing, care).
Preventive measure: Oil product before every ster-
ilization.
Have the manufacturer repair the product.
Steep rise in temperature after a
short period of time Observe instructions for use (nominal operating
mode).
Have the manufacturer repair the product
Blunt tool Tool blades worn Change tool.
Loud running noise Broken gearing/ball bearings of the
product Loud, perceptible noise during
operation Follow operating instructions (preparation, care).
Preventative: lubricate product before every steril-
ization.
Have the manufacturer repair the product
Lid cannot be
attached/removed Lid not compatible Lid does not click into place Use the compatible lid for GA334.
Lid deformed/broken Lid is difficult or cannot be
mounted/removed Have the manufacturer repair the lid.
Connection on product
deformed/broken Lid is hard or impossible to
install/remove Have the manufacturer repair the product.
Battery cannot be
inserted/removed Battery not compatible Battery cannot be completely
inserted into the battery com-
partment Use the compatible battery for GA334.
Battery deformed/broken Battery is hard or impossible to
insert/remove Have the manufacturer repair the battery.
Battery shaft to product
deformed/defective Battery is difficult or cannot be
mounted/removed Have the manufacturer repair the product
Sterile funnel or battery
removal device cannot be
attached Sterile funnel or battery removal
device not compatible Sterile funnel or battery removal
device not attachable to the bat-
tery shaft Use suitable sterile funnel or battery removal
device for GA334.
Sterile funnel or battery removal
device deformed/broken Sterile funnel or battery removal
device difficult or not attachable Change sterile funnel or battery device.
Battery compartment at product
deformed/broken Sterile funnel or battery removal
device is hard or impossible to
attach Have the manufacturer repair the product.