64
Cowl Preparation for
Canister mufflers
1. Gather the cowl and provided air exit hole
templates as shown.
COWL INSTALLATION
2.
Tape the cowl templates to the bottom of the
cowl as shown.
3. Use a felt tip pen to trace the cowl cut outs onto
the bottom of the cowl as shown.
Note:
Take care and test painted areas prior to
using any type of paint remover, rubbing
alcohols or cleaners to remove any pen lines.
4.
Remove the templates and use a rotary cutting
tool, files, and sandpaper to cut out and
smooth the edges of the cooling openings in
the bottom of the cowl as shown.
Note:
The following steps are if you are using
canister style mufflers. If using
standard
mufflers skip to page 66 step number 1
