17
4. Use thick CA on each screw prior to
installing to lock screws in place
Note:
CA glues have a fast drying time.
Remember to work quickly.
5.
Align the left and right sides of the control
horns to the mounting holes and secure using
six wood screws as shown.
6. Attach 4-40 ball link to the under side of the
servo arm using 4-40 bolt, brass spacer and lock
nut.
Note:
1” servo arm is recommended for best
results. A 1 1/4” servo arm is required to obtain
full deflection of the aileron 55º bevel.
7.
Correct installation of ball link and brass
spacer to servo arm shown below.
