50
21.
Covering removed from all of the air exit
holes.
22. Assemble the headers and canisters with the sili-
cone couplers and clamps as shown. Teflon
plumbing tape may be used to help seal the
flexible part of the header pipe if desired.
23.
Install the canisters into the canister mounting
bracket and into the silicone vibration isola-
tors.
Temporarily
attach the header pipes to
the engine as shown to check for proper align-
ment and fit.
Throttle Servo Installation
Now is a good time to think about
installing your throttle servo
1.
Install the throttle pushrod onto the throttle
servo using a ball link threaded onto the push-
rod wire. With the servo arm 90º to the servo
body, align the pushrod with the engine throt-
tle arm. Then locate the throttle servo on the
bottom of the engine box between the header
pipes. Trace around the edge of the servo
body as shown.
