77
17. Push receiver antenna all the way into the pre
installed receiver antenna guide tube.
Note
: Apply baby powder
or
corn starch to
antenna wire to assist getting it into the guide
tube.
18. Tape the receiver antenna wire to the radio
mounting tray and to the end of the antenna
guide tube as shown. This will prevent the
antenna wire from vibrating back out.
19. Attach all servos, battery, regulator, and switch
leads to the proper connectors.
A typical radio installation is shown below.
16.
Mount the receiver battery and regulator as
desired using the radio tray cutouts, nylon ties,
Velcro and screws.
