51
2. Throttle servo cutout tracing prior to cutting out
servo mounting hole.
Note:
If using standard style mufflers servo
location will be similar.
3.
Remove the headers and canisters as shown.
4. Use a rotary cutting tool to cut out the throttle
servo mounting hole.
Note:
Cover engine with a towel or cloth to protect
from any debris getting into the carburetor or
cylinders.
5.
Install the throttle servo with pushrod attached
into the throttle servo mounting hole as shown.
With the servo arm centered and the throttle
arm at half throttle, measure and mark the end
of the throttle pushrod wire that will be in-
serted into the threaded coupler.
