35
20.
Hint:
If additional crimping is needed a small
C-Clamp may be used for additional crimping
pressure.
21.
A drop of thin CA may be applied to the
swage tube to help secure the cable
22.
Adjust rudder pull-pull cables to desired ten-
sion by screwing in or out on the threaded cou-
plers and or ball links. Make all adjustments
with the rudder servos still powered up and
centered, and the rudder still taped in the neu-
tral position. Ensure the servos do not fight
each other at center or at either end point.
Tail Wheel Installation
1. Gather the tail wheel parts shown below. Tail
wheel strut and 2 leaf springs, 3 tail wheel
mounting screws, steering tiller, 2 tiller mount-
ing screws, and 2 steering springs.
