61
10.
Connect the fuel line from the “T” to the fuel
dot stopper as shown. Allow enough slack in
the line to pull out and connect to the fueling
pump.
11. Install the fuel vent line to the tank vent. We
recommend looping the vent line to the rear of
the fuel tank as shown to prevent fuel spilling
when the model’s tail is lifted or flying a
down line. We have found this will give you
longer flying times with the same size fuel
tank.
12.
Use a 5/16” drill bit to drill the vent line exit
hole in the balsa tunnel baffle as shown. Pass
the vent line through the hole to exit out the
bottom of the fuse as shown.
13.
Mark the location of the fuel vent exit hole on
the landing gear cover as shown.
