27
5. Epoxy the hinges into the fin first and allow ep-
oxy to fully cure.
Note:
Ensure you have free and full travel of each
hinge.
6.
Mix epoxy in mixing cup and use a tapered
stick to apply the epoxy inside the pre-drilled
holes in the leading edge of the rudder. Apply
epoxy on to each hinge.
7.
Carefully slide the rudder onto each hinge and
against the trailing edge of the fin. Wipe away
excess epoxy with alcohol wetted wipes.
8. Ensure there is no gap between fin and rudder.
Allow epoxy to fully cure.
Note:
Ensure you have full rudder deflection
before epoxy fully cures.
