43
Engine Installation
1.
The 100cc YAK-54 will accept a wide range
of engine types. Illustrations for a DA-100
installation are provided below.
ENGINE, MUFFLER OR CANISTER AND
THROTTLE SERVO INSTALLATION
2. Locate the laser cut engine mounting template
for either the DA-100 or 3W-100 / 106.
Note:
If other engines are used the templates may
be modified to fit you engine selection. Center
your engine over the laser marked thrust lines
on the template. Mark and drill the engine
mounting hole locations for your engine.
Follow the next steps for mounting your
engine
3.
Line up the template with the pre-marked
firewall thrust lines. Mark the location of the
engine mounting holes.
4.
Center punch the engine mounting hole loca-
tions.
