56
Ignition module Installation
1.
Position the ignition module inside the engine
box to allow both of the spark plug leads to
exit and properly connect to the engine with-
out excess tension or chafing. Mark the loca-
tion for the nylon tie holes.
IGNITION MODULE INSTALLATION
2.
Use a 1/4” drill bit to drill the nylon tie mount-
ing holes as shown.
3.
Roll the supplied foam rubber to make a
4 layer pad as shown. Make the pad slightly
larger than the ignition module as shown.
4.
Install the ignition module and the foam pad
with a nylon tie as shown.
