5
KIT CONTENTS
100cc YAK-54 ARF-QB
Basic Aircraft Parts:
Fuselage -
vertical fin installed
– covered, engine
box & firewall installed - fuel-proofed - pre drilled for
mounting of the tail wheel.
(4) 8-32 blind nuts installed for main landing gear
(4) 4-40 blind nuts installed for the mounting of the
stab
(6) 4-40 blind nuts installed for the mounting of the
cowling
(2) 4-40 blind nuts installed for the mounting of
landing gear hatch cover
(1) Hatch cover for the landing gear –covered,
installed by (2) 4-40x16mm hex style bolts and
(2) 3mm flat washers
(1) Canopy base-painted, installed on the fuselage by
(4) 4-40 blind nuts and (4) 4-40x14mm hex style
bolts
(1) Tinted Canopy—glued on the canopy base and
painted
(4) #6 bonded washers for the mounting of the
canopy
base
(4) 3mm split lock washers for the mounting of the
canopy
base
(1) 3.5(o.d.) x1250mm Antenna guide tube installed
(2) 3.5(o.d.) x70mm rudder pull-pull exit tubes
installed
Left Wing with Aileron
– covered: Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mounting.
(2) Aluminum anti-rotation dowels - installed pre-
drilled hole for cotter pin installation
(8) pin point hinges (
glued
) Read to fly
(2) Aileron servo strings installed
Right Wing with Aileron
– covered:
Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mounting.
(2) Aluminum anti-rotation dowels - installed pre-
drilled hole for cotter pin installation
(8) pin point hinges installed (
glued
) Read to fly
(2) Aileron servo strings installed
Horizontal Stabilizer with elevator assembly
—covered
(10) pin point hinges (
glued
) -Ready to fly
Elevators
Pre-drilled
for the mounting of the
control
horns
