60
6.
Cut off excess nylon tie material after tank is
firmly installed.
7.
Tank mounting complete.
8.
Install the fuel tubing as shown securing with
small nylon ties. Connect the fuel line to the
engine carburetor intake nipple. You will need
an after market fuel “T” and fuel filling dot.
Note
: We recommend using a fuel filter in the line
going to the engine carburetor.
9. Install the fuel filling dot as desired on the side
of the fuse. Do not allow the fuel dot to
interfere with the leading edge of the wing.
Note
: The higher you mount the fuel fill dot the
less fuel will siphon out when fueling.
