28
Rudder Control Horn Installation
1.
Gather the rudder control linkage parts shown
below. 2 Rudder cables, 2 4-40 ball link as-
semblies, 2 4-40 threaded metal RC links, 4
threaded couplers, 4 brass swaging tubes, 2
left and 2 right side control horns, and 12
wood screws.
3.
Align the control horns over the factory drilled
holes.
4. Use thick CA on each screw prior to installing to
lock screws in place
Note:
CA glues have a fast drying time.
Remember to work quickly.
2. Gather the rudder control horn parts as shown
below. 2 4-40 ball link assemblies and 2 left
and 2 right side control horns. Assemble the ball
links between the control horns as shown. Se-
cure with nylon lock nut.
Note:
mount ball link to bottom control horn hole
to obtain full rudder deflection
