manualshive.com logo in svg

ADTRAN DS3-PSM, Installation And Maintenance Practice

Share
Download
ADTRAN DS3-PSM Installation And Maintenance Practice Download Page 132

Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice

122

 

61181041L3-5A

Sar Timeouts

This field displays the number of times that the Segmentation 
Reassembly (Sar) exceeded the reassembly time limit.

Endpoint2

Tx Cells

This field displays the number of User and OAM cells transmitted 
on this PVC/PVP.

Rx Cells

This field displays the number of User cells received on this PVC/
PVP before any policing actions are taken.

Rx OAM Cells

This field displays the Number of OAM and RM cells received on this 
PVC/PVP before any policing actions are taken. This count does not 
include any cells received with an OAM CRC-10 error.

Discarded CLP=0

This field displays the number of nonconformant cells discarded on 
this PVC/PVP that arrived with the CLP bit = 0.

AIS State

This field indicates if the endpoint of a PVC/PVP is in an AIS State.

RDI State

This field Indicates if the endpoint of a PVC/PVP is in an RDI State

Discarded CLP=0+1

This field displays the number of non-conformant cells discarded on 
this PVC/PVP that arrived with the CLP bit = 0 or 1.

Tagged CLP=0 Cells

This field displays the number of nonconformant cells with the 
CLP=0 bit that had the CLP bit changed to 1 due to policing.

Table 75.  VC/VP Statistics Screen Fields (Continued)

Field

Description

Summary of Contents for DS3-PSM











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands