ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 178 / 190

Index
Index-2 ATLAS 800 User Manual 61200180L1-1
blinking green system LED 4-3
blinking red module status LED 4-3
blinking red system LED 4-3
blue alarm 7-3 , 7-4
boot ROM rev 6-3
bootROM 6-17
bursty errored seconds 7-4
C
called digits transferred 9-11 , 9-16
cancel 4-1 , 4-4
menu 4-5
capture 12-7 , 12-9
category 6-4
logging A-1
chain in 2-4
pinout 2-5
chain out 2-3 , 2-5
pinout 2-5
chain port
configure 6-8
framing errs 6-6
overrun errs 6-6
Rx bytes 6-6
signal leads 6-6
status menu 4-7
Tx bytes 6-6
chain port configuration 4-8
chain-in port 2-3
chain-out port 2-3
challenge # 4-11
clear
performance data 7-4
selftest log 6-17
system event log 6-4
system LED 6-5
test pattern 7-6
clear history 4-12
clear key 4-1 , 4-4
clear log 12-11
clearing fields 4-2
clock 6-10
CLR 7-4
code 7-5
colors 12-6 , 12-9
community
trap destination 6-10
completed network map 9-27
completed user map 9-28
config 4-7
config menu
ethernet configuration 4-8
S0 system 4-7
S1-S8 4-9
config transfer 6-15
configuration
from port 8-3
get from TFTP server 12-13
interface 9-7
load 6-16
module 7-5
save to server 6-16
save to TFTP server 12-12
use 6-16
configuration file
get from server 6-15
send to server 6-15
configuration menu 4-7
configure 6-8
chain port 6-8
configure
port type 6-8
default gateway 6-8
ethernet port 6-8
ethernet port name 6-8
event logging 6-10
flow control 6-9
IP address 6-8
module slots 7-2
subnet mask 6-8
configuring ATLAS 800 PLUS 6-1
configuring Syslog 6-10
connect
Telnet menu 12-5
connection
activate 8-2
create/edit 8-2
current 8-2
dedicated 7-6
from 8-3
LAN 2-6
name 8-2
power 2-1
connections 2-3
connects 8-2
contents of shipment 2-1
control in 2-4
pinout 2-5
control out 2-5
controlled slip seconds 7-4
controller
revision 6-3
controller board slots 7-1
controller info 7-3
control-Z 5-3
create
dedicate map 8-2