manualshive.com logo in svg

ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 135 / 190

Share
Download
ADTRAN ATLAS 800 Series Module QUAD E1 User Manual Download Page 135

61200180L1-1

ATLAS 800 User Manual

12-1

Chapter 12

 ADTRAN Utilities

OVERVIEW

ADTRAN delivers several PC software utilities along with the ATLAS 800. 
These utilities are located on the three diskettes that came with your 
shipment. They also include MIB files (located in the MIB directory). 

The utilities make interfacing with the terminal menu and transferring 
configuration files to and from TFTP servers easier. The utilities all run on 
Microsoft Windows 3.1 or higher. The following sections describe the 
Syslog, Telnet, VT-100, and TFTP Server utilities.

SYSLOG HOST DAEMON

The SysLog Host Daemon

 

allows remote monitoring, collecting, and log-

ging of ATLAS 800 events in realtime. This information can be useful during 
installation setups and/or troubleshooting. 

To use this utility, you must configure the remote ATLAS 800 (using a Telnet 
or VT-100 connection) with destination IP address of the PC to which you 
want to transmit SysLog messages; i.e., the IP address of the PC running the 
SysLog host utility.

Review the readme file (Readme.txt) for the latest information 
about the utilities.

Summary of Contents for ATLAS 800 Series Module QUAD E1































































































































































































Reviews:

No comments