ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 49 / 190

Chapter 4. Using the Front Panel
61200180L1-1 ATLAS 800 User Manual 4-7
>
STATUS
The Status menu branch lets you view the status of the ATLAS _ 800 Base
Unit and any installed modules.
» S0 System
Displays status options that are available for the ATLAS _ 800 Base Unit.
Choose from Ethernet (see Ethernet Status on page 4-7) or Chain Port (see
Chain Port Status on page 4-7).
»» Ethernet Status Shows the status of the 10BaseT Ethernet connection port. The following
port status options display in the LCD window. An asterisk (*) indicates ac-
tivity for the item.
»» Chain Port Status Indicates the status of the Chain Port. The following port status options dis-
play in the LCD window. An asterisk (*) indicates activity for the item.
(Read-only.)
» S1—S8
Displays the current status of installed modules.
S1
corresponds to slot 1,
S2
to slot 2, and so on. When you select one of these options, an expanded de-
scription of the card status displays. The status types include
ON
(Online),
OFF
(Offline),
NRSP
(No Response),
NRDY
(Not Ready), and
RST
(Restart-
ing).
>
CONFIG
The Config (Configuration) menu branch provides limited configuration
control of the ATLAS _ 800.
» S0 System
Displays configuration options that are available for the ATLAS _ 800 Base
Unit. Choose from Ethernet Configuration (see Ethernet on page 4-8) or
Chain Port Configuration (see Chain Port on page 4-8).
To help you follow the terminal menu hierarchy, the following notations are used.
>
MENUS
» Submenus
»» Sub-submenus
TX Data is being transmitted from the 10BaseT port on the system con-
troller.
RX Data is being received on the 10BaseT port.
LNK The current status of the 10BaseT link integrity test is indicated
(LNK should always be on when the unit is connected to a function-
al 10BaseT hub).
RTS Request to send.
CTS
Clear To send.
DTR Data terminal ready.
DCD
Data carrier detect.