ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 87 / 190

Chapter 8. Dedicated Maps Terminal Menu
61200180L1-1 ATLAS 800 User Manual 8-3
»» FROM Slt
Write security: 3; Read security: 5
(From Slot) Specifies the slot to use for the
FROM connection. When you
select this option, a list of all of the slots and the modules installed in the
slots displays. Pick the appropriate slot and press
Enter .
»» Port
Write security: 3; Read security: 5
Specifies the port to use for the
FROM connection. When you select this
option, a list of ports and module types appears. Pick the appropriate port
and module type, and press
Enter .
»» From Config
Write security: 3; Read security: 5
Specifies the configuration for the
FROM connection. The selections dis-
played in this field are based on the type of module selected in the
FROM Slt option. You must input the following information—based on the
module type.
DS0
Selection
Write security: 3; Read security: 5
Defines DS0s for a T1 port. Use this field to define which
DS0s will be used for this connection. You can enter the
DS0s in several ways. For example, to enter DS0s one
through five, enter
1-5 . For DS0s one and five, enter 1,5 .
DS0
Available Read security: 5
Indicates which DS0s of the T1 are assigned. DS0 assign-
ment is based on the following items:
digits
0—9 This DS0 is available. The digit that displays in
this field represents the last digit of the DS0
number.
* This port is requesting this DS0 for this con-
nection, but the DS0 is not yet activated.
! This DS0 is used by this port in this connection
and is activated.
s This DS0 is used in the switched Dial Plan.
S This DS0 is used in the switched Dial Plan and
conflicts with this connection.
n This DS0 is already used in this Dedicated
Map.
N This DS0 is already used in this Dedicated
Map and conflicts with this connection.
Data Rate
Write security: 3; Read security: 5
Defines the data rate per DS0. If
FROM Slt is an Nx port,
the data rate per DS0 must be set. You can choose from
64 kbps or 56 kbps.