ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 119 / 190

Chapter 9. Dial Plan Terminal Menu
61200180L1-1 ATLAS 800 User Manual 9-25
Setting PRI A Global Param for Example 3
Step Action
1
Navigate to Dial Plan (in the terminal menu).
2
Enter the area code by selecting Global Param/Area Code and
pressing Enter. Input the area code, and press Enter again.
3
Define the interface type as PRI by selecting Network Term and
entering the following settings: Slot = 0, Port = 1, Sig = PRI.
4
Tell ATLAS to forward any call to the network by selecting
Out#Accept and
entering $ in the number field. Leave all other
selections set to default (Enabled).
5 Ensure Out#Reject contains no entry.
6
Set the PRI switch type to National ISDN (from Ifce Config).
7
Back out of the connection to the index number column by
pressing ESC on the keyboard.
8
Insert three more connections into the list for the BRI lines by
typing the letter I three times.
9
Enter Out#Accept and Out#Reject numbers for Slot 1/ Port 1 .
The Out#Accept numbers have two entries:
10
Set the BRI switch type (from Ifce Config) used by the network to
National ISDN. From SPID, enter the SPID numbers and phone
numbers which match the network provisioning for this BRI line.
11
Press ESC to return to the index column, #.
Setting PRI B Global Param for Example 3
Step Action
1 While on the entry for BRI A, type C to copy the entire BRI A entry.
2
Move to the next connection list entry and type P to paste all of the
BRI data.
3 Move to each field and modify as appropriate for BRI B.
Entry 1) 888-01[0,1]X
Entry 2) 888-0120
Allows all numbers 888-0100 to 888-0120