
Chapter 11. SNMP Management
11-4
ATLAS 800 User Manual
61200180L1-1
When enabled, ATLAS sends alarm traps to the each member of the trap
destination list upon detecting status bit changes in dsx1LineStatus. Each sta-
tus change sets an event bit = 1 in the adDS1LineEvent variable in the DS1
alarm table. If you have previously set the corresponding enable bit = 1 in
the adDS1LineArm variable and adDS1AlarmEnable = On, then ATLAS sends
an alarm trap message. A single alarm trap message may report multiple
event changes. ATLAS clears the event bits after sending the trap message
or sending the response to a Get request for the adDS1LineEvent variable.
DS1 Alert Traps
RFC1406 also defines a series of Current and Total Alert threshold values.
You can enable ATLAS to send an alert trap message to each member of the
trap destination list when accumulated error statistics exceed these thresh-
old values. Table 11-4 describes the alert traps supported by ATLAS for
events that have occurred in the last 15-minute interval.
Table 11-3. DS1 SNMP Traps
Alarm
Severity
Description
adATLAS800NoAlarm
Warning
No alarms are present.
adATLAS800RxYellow
Minor
The Far end is experiencing Red Alarm
(a.k.a. Yellow Alarm).
adATLAS800TxYellow
Warning
The Near end is sending Loss Frame Indication
(a.k.a. Yellow Alarm).
adATLAS800RxAIS
Minor
The Far end is sending Alarm Indication Signal
(a.k.a. Blue Alarm).
adATLAS800TxAIS
Warning
The Near end is sending Alarm Indication Signal
(a.k.a. Blue Alarm).
adATLAS800RedAlarm
Major
The Near end is experiencing Loss of Frame
(a.k.a. Red Alarm).
adATLAS800LOS
Major
The Near end is experiencing Loss of Signal.
Table 11-4. DS1 Current Alert SNMP Traps
Current Alert
Severity
Description
adATLAS800CurrentES
Warning
The current interval errored second threshold has been
exceeded.
adATLAS800CurrentSES
Warning
The current interval severely errored second threshold
has been exceeding.
adATLAS800CurrentSEFS
Warning
The current interval severely errored framing second
threshold has been exceeded.
adATLAS800CurrentUAS
Major
The current interval is unavailable.
Summary of Contents for ATLAS 800 Series Module QUAD E1
