ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 127 / 190

Chapter 10. Updating Firmware
61200180L1-1 ATLAS 800 User Manual 10-5
When the update process has successfully completed, Idle displays in Cur-
rent Update Status , and Module Update Complete displays in Previous
Update Status . Either the module restarts immediately and resumes oper-
ation, or it restarts at the specified time and day of the week—depending on
your selection.
If an error occurred during the update process, Previous Update Status
displays the appropriate error message. In this case, return to step 3 and at-
tempt the update process again. If the same error occurs, contact ADTRAN
Technical Support.
9
Select Begin Firmware Update to start the update process. Enter
Y to confirm the transfer and to set up the module to receive the
TFTP upload.
During the TFTP upload process, various status messages
display in
Current Update Status to indicate progress.
Table 10-1 describes these messages.
10
To update additional modules, begin at step 3 and repeat this
process.
Table 10-1. TFTP Upload Messages
Message Meaning
Contacting
Server
Indicates communication with the TFTP network
server is trying to be established with the specified
server address in the TFTP Server IP Address
field.
Beginning TFTP
Transfer Indicates communication with the TFTP network
server has been established and the update file is
being transferred between ATLAS and the TFTP
network server.
Completed
Indicates the ATLAS product successfully received
the update file.
Error: File Not
Found Indicates the TFTP network server was unable to
locate the specified file name or path in the TFTP
Server Filename field.
Error: Access
Violation
Indicates the TFTP network server denied ATLAS
access to the given update file name and path.
Please verify appropriate user rights are selected
for the specified path.
Instructions for Updating Firmware Using TFTP (Continued)
Step Action