ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 72 / 190

Chapter 6. Terminal Menu and System Control
6-12 ATLAS 800 User Manual 61200180L1-1
»» Active Write security: 0; Read security: 5
Displays the number of users for each label that are currently logged into
the system.
>
SYSTEM
UTILITY
Use the System Utility menu to view and set the system parameters shown
in Figure 6-4.
Figure 6-4. System Utility Menu
» Update Firmware
Write security: 1; Read security: 5
Updates firmware when ATLAS
_ 800 enhancements are released. Two
transfer methods are available for use in updating any modules that contain
Flash memory—including the ATLAS system controller.
The first transfer method uses the ATLAS serial Chain-In port of the system
controller and XMODEM protocol. For detailed information on how to up-
date firmware using this method, see on page 10-1.
Instructions for Changing Passwords
Step Action
1 Select the Password field—a new Password field displays.
2
Type the new password in the Enter field.
3 Type the new password again in the Confirm field.
The password can contain up to 12 alphanumeric characters.
You can also use spaces and special characters in the
password.