ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 69 / 190

Chapter 6. Terminal Menu and System Control
61200180L1-1 ATLAS 800 User Manual 6-9
»» Initialize Modem
Write security: 4; Read security: 5
Sends the Modem Initialization string to the modem. When you select this
command, the following message displays:
Please verify a modem is
connected to the chain port before continuing. Confirm (y/n). Ensure
that a modem is connected before selecting Y .
»» Flow Control
Write security: 2; Read security: 5
This option sets the flow control for the chain port. You may configure the
chain port flow control for
OFF or H/W (hardware).
» SNMP
Write security: 3; Read security: 5
Provides a way to configure SNMP access for the ATLAS
_ 800. For detailed
information on SNMP, refer to SNMP Management on page 11-1. The follow-
ing options are available for review and editing:
»» SNMP Access
Write security: 3; Read security: 5
Defines whether SNMP access to the ATLAS
_ 800 is enabled or disabled.
Select the appropriate option.
»» SNMP Communities
Write security: 3; Read security: 5
Defines SNMP manager(s) characteristics as follows:
»» Trap Transmission
Write security: 3; Read security: 5
Enables and disables SNMP trap transmission.
»» Authen Trap
Transmission
Write security: 3; Read security: 5
Enables and disables the authentication failure trap.
IP Address Specifies the IP address of the network manager.
Privileges Defines Get (read-only) and Get/Set (read and write) privi-
leges.
Get Name Defines the community name for Get access. This value
must match the Get name defined on the network manage-
ment station. Public is the default name.
Set Name Defines the community name for Set access. This value must
match either the Get or Set name defined on the network
management station. Public is the default name.