ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 81 / 190

Chapter 7. Modules Terminal Menu
61200180L1-1 ATLAS 800 User Manual 7-3
» Status
Read security: 5
Displays status information on the ATLAS
_ 800 T1/PRI ports and other
installed modules as follows:
» Rev
Read security: 5
Displays the hardware revision of the ATLAS
_ 800.
Modules (T1/PRI) Menu
This section provides detailed information on the
Modules
/
Menu
sub-
menus.
Menu
provides access to commands that allow you to review the sta-
tus of various options, change the configuration for general parameters, and
initiate tests. This section only describes the menu options for the T1/PRI
controller port (the ATLAS
_ 800 Base Unit). For details on menu options for
individual modules, refer to the appropriate module manuals.
»» Controller Info
Read security: 5
Displays general information about the ATLAS
_ 800 Base Unit and T1/PRI
ports as follows:
»» Alarm Status
Read security: 5
Displays any active alarms as follows:
Online The module is enabled and is responding to the system
controller’s status polls. This is the normal response of the
system.
No Response The module is enabled but is not responding to the sys-
tem controller’s status polls. This response indicates a
problem in the system or that the module is not installed.
Empty The system controller has not detected the presence of a
module in the system, nor has a module been manually
enabled for this option slot.
Offline The modules is installed but has been taken Offline by a
user. The module is still responding to controller polls.
Offline/No
Response: The module is installed but has been taken Offline by a
user. The module is not responding to polls.
Part Num Displays the part number of the ATLAS _ 800.
PLL Status
(Phase Lock Loop)
Indicates whether the clock is locked to its specific
source.
Prt
Port number displayed.
Loss of Signal
(LOS) No signal detected on port interface.
Red Alarm
(RED) Not able to frame data received on the port. Alternate-
ly referred to as Out of Frame (OOF).