ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 41 / 190

Chapter 3. Operating the ATLAS 800
61200180L1-1 ATLAS 800 User Manual 3-5
After connecting a VT-100 terminal or a computer running VT-100 terminal-
emulation software to this port, you may need to press
Ctrl-R to refresh the
screen display.
When you begin the VT-100 session, you will be prompted for a password.
The default password is
password (which is a Level 0 superuser password).
You can change this password using the Access Passwords option, which
is only accessible through the terminal menu. See Access Passwords on page
6-11 for details.
Using T-Watch PRO
T-Watch PRO is the ADTRAN Microsoft Windows management software
program designed to control TSU units from a remote PC. It provides limit-
ed control over the configuration of the ATLAS
_ 800 using a graphic inter-
face. Currently, you can choose ATLAS _ 800 from a list of products, and
T-Watch PRO automatically initiates a Telnet session to which you can con-
nect and manage the ATLAS
_ 800 Base Unit. Currently, T-Watch PRO auto-
matically receives SNMP traps from an ATLAS _ 800.
Instructions for Setting Up an ATLAS 800 for VT-100 Terminal Mode
Step Action
1
Set the baud rate on the VT-100 terminal to 9600 baud (8/N/1).
2
Use the Front Panel to set the ATLAS _ 800 baud rate to match
the terminal baud rate. Select 2) CONFIG, S0) SYSTEM, 2)
CHAIN PORT, then 1) BAUD RATE.
3
Use the ADTRAN-provided VT-100 terminal adapter to connect
the COM port of a VT-100 compatible terminal, or equivalent, to
the eight-pin modular jack labeled CONTROL on the rear of the
unit. This connection provides both local and remote
configuration.
4
Repeatedly press Enter on the Front Panel until the Login Menu
appears.