ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 65 / 190

Chapter 6. Terminal Menu and System Control
61200180L1-1 ATLAS 800 User Manual 6-5
» Ethernet Port
Read security: 5
Displays status information about the Ethernet port. An asterisk (*) indi-
cates activity for the item. The following read-only fields are available to
review:
» Clear System LED
Write security: 3; Read security: 5
Changes the color of the system LED on the front panel from yellow (indi-
cating a previous error) to green (OK). The system LED turns red if the
ATLAS
_ 800 detects a major system failure. If the failure condition clears,
the LED turns yellow and remains yellow to warn of the past failure.
» System Alarms
Read security: 5
Indicates the status of major system components. An asterisk (*) indicates
activity for the items. The following read-only fields display in this field:
» System Timing
Source
Read security: 5
Indicates which timing source (primary or backup) is currently being used
by ATLAS and if ATLAS is locked onto this source. If the display does not
indicate locked, the ATLAS
_ 800 does not have a valid source of timing and
cannot reliably transfer data. Review the current setting for system timing
source in the
System Config menu. See Primary Timing Source on page 6-7
and Backup Timing Source on page 6-7 for details.
» Resource Usage
Write security: 4; Read security: 5
Indicates resource use (analog modems; digital modems; voice compres-
sion).
»» Data Tables
I/F Status Indicates the current status of the 10BaseT port.
Tx Frames Indicates the number of frames transmitted from the
10BaseT port since system startup.
Rx Frames Indicates the number of frames received on the 10BaseT
port since system startup.
Temp Fail The system’s internal temperature is outside normal limits.
PS1 Fail The main power supply is not functioning correctly.
PS2 Fail The backup power supply is not functioning correctly.
Resource Type Displays the system resources list.
Current Shows the number of resources available (not in use)
and the total number of resources. If a resource is tak-
en off line, it is not included in the total.
Average Shows the average number of resources available
since the statistics were last reset.
Minimum Shows the fewest number of resources available since
the last reset.