ADTRAN ATLAS 800 Series Module QUAD E1, User Manual, Page: 110 / 190

Chapter 9. Dial Plan Terminal Menu
9-16 ATLAS 800 User Manual 61200180L1-1
»» Strip MSD Write security: 3; Read security: 5
Strips a selected quantity of the Most Significant Digits (MSD) of a dialed
number for ATLAS prior to being forwarded out of the port. The choices are
None , 1 , 2 , or 3 . For example, if you set a Network port to accept all calls
beginning with 9 (9$) and then set Strip MSD to 1, all digits except the lead-
ing 9 will be sent toward the Network.
»» Netwrk Spec. Fac. -
Voice
Write security: 3; Read security: 5
(Network Specific Facility - Voice). Defines the specific facility IEs to send to
the Network. Use this option if the customer has subscribed to a network
specific facility service, including AT&T SDN, AT&T Megacom 800, AT&T
Megacom, AT&T Accunet, AT&T Long Distance, AT&T International-800,
AT&T Dial-It 900/Multiquest, National ISDN INWATS, Nortel Private Net-
work, Nortel InWats, Nortel OutWats, Nortel Foregin Exchange, and Nortel
Tie Trunk. A setting of
Normal indicates no special facilities have been sub-
scribed. The facility request can be different for voice calls and data calls.
»» Netwrk Spec. Fac. -
Data
Write security: 3; Read security: 5
(Network Specific Facility - Data) Defines the specific facility IEs to send to
the Network. Use this option if the customer has subscribed to a network
specific facility service, including AT&T SDN, AT&T Megacom 800, AT&T
Megacom, AT&T Accunet, AT&T Long Distance, AT&T International-800,
AT&T Dial-It 900/Multiquest, National ISDN INWATS, Nortel Private Net-
work, Nortel InWats, Nortel OutWats, Nortel Foregin Exchange, and Nortel
Tie Trunk. A setting of
Normal indicates no special facilities have been sub-
scribed. The facility request can be different for data calls and voice calls.
»» Called Digits
Transferred
Write security: 3; Read security: 5
Defines to ATLAS the number of called-number digits to forward. When
attached to a PBX, the PBX may be provisioned to expect to receive fewer
than all of the called digits of the incoming call. Normally set to
All , other
options include None , Three , and Four .
»» Outgoing Caller ID Write security: 3; Read security: 5
Inserts a called ID based on the following selections.
The Strip MSD parameter does not affect the Call Accept criteria. All of
the digits (including the MSDs that are subsequently stripped) are used
as accept criteria.
Send as
provided ATLAS forwards whatever ID it receives (including None).
Substitute if
not present ATLAS inserts a User-defined ID value if no value is re-
ceived.
ID
Presentation Sends to the Network control information for
the presentation of Caller ID (
Presentation
Allowed; Presentation Restricted; Number
Not Available
).
ID Number Value for Caller ID to be sent to the Network
(i.e., 256 963 8020).