ADEMCO VistaKey-SK, Installation & Setup Manual

Page: 96 / 108

VistaKey Installation Guide
8–2
ACS Trace
NOTE: For the events below, the ASC Group and/or Cardholder Trace must be on.
Event Code Specifier
Access Grant 422 User #
Access Denied 421 User #
Egress Grant 425 User #
Egress Denied 424 User #
NOTE: An Access Point Lock event is not logged or reported
Alarm Panel Logging
The following list contains all additional events that may be entered into the event log in the
alarm panel. The entries are grouped by log category.
NOTE: The below events will only be logged if their types are enabled in alarm panel field
1*70. Refer to your alarm system installation and setup guide for additional information.
Alarm
Event Log Entry Specifier
Door Forced DR FORCE DSM Zone #
Door Forced Restore DRFO RST DSM Zone #
NOTE: The events below are only logged when the Access Group Trace or Card Trace
options are enabled.
Access Grant ACS GRT [DSM Zone #] U [User #]
Access Denied ACS DENY [DSM Zone #] U [User #]
Egress Grant EGR GRT [DSM Zone #] U [User #]
Egress Denied EGR DENY [DSM Zone #] U [User #]
Check
Event Log Entry Specifier
Door Propped DR DROP DSM Zone #
Door Propped Restore DRPO RST DSM Zone #
DSM Trouble DSM TRBL DSM Zone #
DSM Trouble Restore DSM RST DSM Zone #
RTE Trouble RTE TRBL DSM Zone #
RTE Trouble Restore RTE RST DSM Zone #
AC Loss at Module* ACLO MOD DSM Zone #
AC Loss at Module Restore ACRST MOD DSM Zone #
* If a module experiences a loss of power or if the address switch on a VistaKey
module is changed to an improper address, the panel logs an ACLO MOD event and
the AC Loss will be reported. If this event is logged and power is applied to the
module, check that the module’s address switch is set to the proper address.
Bypass
Event Log Entry Specifier
Access Point Bypass ACPT BYP [DSM Zone #] U [User #]
Access Point Unbypass ACPT UNB [DSM Zone #] U [User #]
System
Event Log Entry Specifier
Module Reset RES MOD DSM Zone #
NOTE: An Access Point Lock event is not logged or reported