ADEMCO VistaKey-SK, Installation & Setup Manual

Page: 87 / 108

Section 6 – User Commands
6–13
↓
VISTA Card ID Number
001 Expire use?
UNLIMITED USE
00
“Expire use” defines whether the cardholder access privileges are to
expire with usage. Enter 00 for unlimited use. Otherwise, enter a
number between 01 and 14. Entering a number between 01 and 14
allows that many entry access grants for this cardholder. Egress
grants have no effect on the usage count. Entering 15 automatically
expires the card and no entry grants are permitted even if the
cardholder has executive privilege. Expiring a card will NOT delete
it from the card database; the card retains its card ID#.
NOTE: If you set a card to expire with use and also set the same
card to expire by time (“Expire Month” below), then the card will
expire on the first event to occur.
Enter a number from 00 to 15.
Press [
✲
] to accept the entry.
↓
VISTA Card ID Number
001 Expire Month
NO EXPIRATION
00
Enter two digits from 00 to 15. The digits entered provide the
following expiration functions:
00 = Normal (no expiration) 08 = August
01 = January 09 = September
02 = February 10 = October
03 = March 11 = November
04 = April 12 = December
05 = May 13 = End of Day
06 = June 14 = End of Week (Sunday)
07 = July 15 = End of Month
NOTES:
•
Cards expire at midnight for month, end of day, end of week, and
end of month selections.
•
If you set a card to expire by time and also set the same card to
expire with use (“Expire Use?” above), then the card will expire on
the first event to occur.
Press [
✲
] to accept the entry.
If you entered 01-12, the system displays the “Day of Month” prompt.
If you entered 00 or 13-15 the system advances to the “Vista User #”
prompt.
↓
VISTA Card ID Number
001 Day of Month
00
Enter day of the month. Note that the card
expires at midnight of the day that is
entered.
Press [
✲
] to accept the entry.
↓
VISTA Card ID Number
001 Vista User#
000
Enter a three-digit VISTA User #.
The VISTA user number may be used to allow a cardholder access
to an armed partition even if the cardholders access group is
restricted for that partition. Additionally, the VISTA User # can be
used to allow this cardholder to use wireless keyfobs to grant access
and egress through his allotted access points.