ADEMCO VistaKey-SK, Installation & Setup Manual

Page: 18 / 108

VistaKey Installation Guide
2–6
ACCESS
GROUP
CARDHOLDERS
GROUP
PRIVILEGES
EXECUTIVE
PRIVILEGE
1 Executive Officers a. Can access all access points.
b. Can disarm/arm all partitions.
c. Have access 24 hours a day, 7 days
a week.
d. Valid card swipe automatically
disarms respective partition.
X
2 Office Managers a. Can access points 1 and 2 during
time schedule while partitions are
armed or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 2.
c. Cannot access point 3 or disarm/arm
partition 3.
3 Office Workers a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 2 only while
disarmed and during time schedule.
Cannot arm/disarm partition 2.
d. Cannot access point 3 or arm/disarm
partition 3.
4 Factory Managers a. Can access points 1 and 3 during
time schedule while partitions armed
or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 3.
c. Cannot access point 2 or disarm/arm
partition 2.
5 Factory Workers a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 3 only while
disarmed and during time schedule.
Cannot arm/disarm partition 3.
d. Cannot access point 2 or arm/disarm
partition 2.
Armed Restriction
Description
When this function is enabled, it restricts (prevents) a cardholder in an access group from
entering an access point when the partition to which it belongs is armed. The card must also
not be mapped to a VISTA user who has access to the access point’s partition.
Note that Armed Restriction is disabled by default, which means that all cardholders of this
group are allowed access to the associated point even if the partition is armed. Consequently,
a valid card swipe automatically disarms the partition.
How this feature is used in our example
By enabling Armed Restriction, we have restricted the Office Workers from entering access
point 2 and the Factory Workers from access point 3 when those partitions are armed.
Where to program
Enable or disable Armed Restriction in the VISTA control panel’s *93 menu-driven
programming mode. See Setting Up Access Groups in Section 5: Programming later in this
guide.